Article author

2022-04-02 08:06:05 By : Ms. Snow Wang

At the end of 2017 the folks over at Peak Design were kind enough to send me the latest version (v2) of their Slide Lite camera strap to try out. Well, after a few of months of almost daily use on my Contax 139Q 35mm SLR, I’m pleased to be able to give you all my little review. Before I get into the review, allow me a quick aside about my thoughts camera straps and history with Peak Design’s products to date.

I’m very particular about camera straps. You may not feel the same but to me, they are a little bit more than just a strip of material between two strap lugs. When it comes to analogue cameras specifically, there’s so much variation between the size, weight and shape of cameras and camera types, that picking the right strap can make the difference between loving or hating taking a particular camera out and about for the day.

I settled on OP/Tech Pro Straps for my medium format camera gear a number of years ago. They are modular, super comfortable and have fat neoprene shoulder/neck pads which suit carrying heavy gear for long stints on my shoulder. In addition, because those pads and straps connectors are interchangeable, I can have many “anchors” and share a smaller number of “pads” among them.

Getting to something even close to a universal system universal for my 35mm gear is a little less clear. I veer across many wrist/cuff/shoulder straps depending on my mood and what I’m carrying.

I’m not a stranger to Peak’s gear. Over the years I have supported a few of their crowdfunding campaigns and purchased more bits and pieces via retail. In fact, the original Clutch from their 2014 Kickstarter is still the default strap for my Nikon F100 over three years down the road and still uses the same anchor points I attached the day I received my reward. That says something to me.

EDIT: Jan 2020 and I’m STILL using the original Peak Clutch on my Nikon F100 and have recently picked up a new v3 for my Nikon F6. Expect a little review later in the year.

Enough rambling. Here’s what I cover in this review:

Here’s the short version: it’s a camera strap that according to Peak Design is designed “specifically for mirrorless and smaller cameras”. It’s adjustable, can be mounted on your camera in a few different ways, and is based around Peak’s modular anchor link system. There you go. Review over, job done. Scroll to the bottom and leave a comment.

The longer version is this: it’s an adjustable camera strap made from a single strip of seatbelt-type nylon webbing. The strap is modular and attaches to your camera using Peak’s anchor link system – small discs of plastic embedded with a loop of super-strong nylon-like material. All peak straps share this modular approach and to top it all off, it’s likely that you can modify an existing non-Peak strap to use the anchor link system.

The Slide Lite is a thinner version of its big brother, the Slide. It comes in at 32 mm (1.3″) wide and can be extended from 99 to 145cm (around 39-57 inches for you Imperial system folks). It’s also light, weighing in at a little under 150 grams (about 3 ounces).

It can be used as a neck strap, shoulder strap or cross-body sling.

Forgive the stock photo above, I neglected to take a full-length picture of it along with the others you see in this article, so I cunningly stole one from Peak Design’s product page for the Slide Lite.

In the box you get your strap, a total of four anchor links, an extra (tiny) anchor plate which screws into your tripod mount, an allen key to help mount it and a pouch to store it all in.

(TIP: Click or tap on any of the thumbnails below or later on in this article to have them open in a full screen lightbox.)

I’ve always loved Peak’s packaging. It may seem overkill for “just a camera strap” but believe me, not a single square inch of space is wasted and it’s all very well thought out.

Speaking of which, the front of the box flips open so that you can give the strap a feel. This might not be a big deal for online shoppers but makes for a great experience in-store.

As you’ll have probably guessed by now, I’m reviewing the jet black version of the Slide Lite, which comes with red accents. It looks good.

Being made from a seatbelt-style material, the strap sits somewhere between supple and rigid. It’s soft enough to be comfortable against the skin or light clothing for extended periods of time. I for one didn’t find it digging uncomfortably into my body on extended outings.

The material is understandably smooth and doesn’t provide much in the way of friction to keep it in one place against clothing. This is incredibly useful when using the strap as a cross-body sling. When used in this way I typically keep the camera on my back and the low friction material makes it easy to slide the camera into position when needed.

If you prefer to keep the strap on your shoulder, all is not lost. The reverse side has a 26cm (~10 inch) track of rubber grip. Just flip it over and get the grip you need.

There’s not what you’d call a locking mechanism on the strap’s length adjustment. The buckles and metal loops you see in the pictures below just need a tug to adjust. That said, in usual or even unusual use, it’s really not easy to accidentally change length of the strap by pulling on it without making a conscious effort.  Perhaps this will change with more time and extended use but if my other (+3 year-old) Peak straps are anything to go by, I don’t see that happening.

I should note that the metal loops are simply handles that make adjustment easier. Flip one up and give it a tug to change the strap’s length. This system is especially useful when you have the strap across your body.

For the most part, I used the Slide Lite on my Contax 139Q and 45mm f/2.8 Tessar pancake lens. At 625 grams (1.3lbs), it’s not a heavy combination by any means and I as I mostly carry my cameras on the shoulder, I quickly got used to throwing the strap on with the grip side against my clothes.

I also tested the strap out for a few days with my Nikon FT3 and Nikkor 28mm f/2 lens. With its half case mounted the combination weighs in at 1275 grams (~3lbs) and the weight of the set-up certainly helped to reduce slippage even without flipping over to use the grip. Even after a couple of hours with the strap on the same shoulder, I didn’t feel any discomfort or pinching. 

Peak’s anchor links are where it’s at. They attach to your camera’s strap lugs, the supplied tripod anchor mount, or a suitable tripod plate; and lock into special connectors on the straps themselves.

Every Peak Design strap is compatible with every anchor link (new and old), which means that if you want to change your strap, or change the way you mount your strap to the camera. You do this by effecting a simple push-down-pull-out action and remount the strap to another anchor point.

It may not seem like a big deal but to an aforementioned strap nerd like me, this clever little system brings some welcome modularity with it; you could have a handful of straps shared across a multitude of cameras – very similar to the OP/Tech Pro Strap system I mentioned above – or modify your own straps to use the anchor link system, as you’ll see in an upcoming review of the Peak Cuff wrist strap.

The newer anchor links have a slightly different design to the original version. The nylon cord is thinner and less prone to fraying; and the “inside” of the disk has a slight bevelling to make it easier to switch straps.

The strap sells for under US$50 direct on Peak Design’s website, Amazon, BH Photo and a bunch of other places. It’s a reasonable price when you consider the quality and longevity of their other products.

It’s a good strap! It took me a while to get used to the material and the lack of a locking mechanism (more confusion about this than concern). What I initially expected to be potential negative points didn’t really materialise – lack of grip on the shoulder, having the strap pinch or dig into my skin.

I love the modularity and the new anchor links. They’re much easier to use than the original versions (not that they were problematic before). The apparent thinness doesn’t translate into reduced performance though – each link can support up to 90kg /200lbs.

Heads-up: If you decide to buy one of these for yourself, make sure you check the product code before you do. You’ll want SLL-BK-3 (black) or SLL-AS-3 (ash). If you see a product description or code containing the number “2”, this denotes the original version.

The transfer of knowledge across the film photography community is the heart of EMULSIVE. You can add your support by contributing your thoughts, work, experiences and ideas to inspire the hundreds of thousands of people who read these pages each month. Check out the submission guide here.

If you like what you're reading you can also help this passion project by heading over to the EMULSIVE Patreon page and contributing as little as a dollar a month. There's also print and apparel over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique photographs available for purchase.

I'm EM, founder, overlord, and editor-in-chief at I may be a benevolent gestalt entity but contrary to increasingly popular belief, I am not an AI. Click to see EM's full profile, links and other articles , and please make sure you also check out their website here.

Thank you. Very informative review and the photos showing how it connects/attaches is great.i only have use of my right hand so that’s important to me

Thanks for the kind words, Stephen. Please do let me know if you have any more questions about it. Happy to help where I can.

I am also a long time user of the Slide strap and the Captures (attached to a shoulder strap of each of my backpacks). Peak Design is doing a great job and brought innovation with great quality to the market. My OP/Tech still my preferred choice to carry around my MF gear, but everything else goes with the PD Slide. can not recommend it highly enough.

Marketing Permissions: Please select all the ways you would like to hear from EMULSIVE:

EMULSIVE is (among other things) a space for film photographers of all backgrounds to spread knowledge, experience and thoughts about everything related to film photography.